Sometimes it is difficult to remove.  You can hit it hard with a hammer
using a piece of two by four wood and still won't move.  You can move it out
more to avoid binding.  But it will come off eventually.  Keep those screws,
you will need them later.
Zoltan
----- Original Message -----
From: <JordanVw@AOL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Friday, June 24, 2005 8:30 AM
Subject: Re: need advice on how to pull sliding door cover off and not ruin
paint or c...

> In a message dated 6/24/05 9:50:17 AM Eastern Daylight Time,
> kayakwesty@YAHOO.COM writes:
>
>
>> anybody got any BTDT on the cover?
>>
>>
>
> remove 2 screws, pull out .5 inch,  and hit vertically with palm from
> underneath lower lip
>