Oops:
I just hit it a little harder and it moved... I guess it was the metal ring on the pin that was stuck, which was why I was able to wiggle it around.

Wes

On Mon, Jun 27, 2005 at 11:05:36AM -0500, Wesley Alden Pegden wrote:
> Hi guys,
> I went to remove my (left) front brake pad to get a look at the condition.  I have the van on a jack stand with the wheel off.  It looks like I have what the haynes manual calls the "Trever" style calliper: two pins which punch out towarrds the car.  At least, that's how it *should* work.
>
> After removing one pin (the lower one) without trouble, the upper one won't punch out.  I've punched it loose enough that I can turn it with my fingers (or a wrench), and wiggle it back and forth a bit, but can't get it to puch out.  I can't tell what's holding it---it certainly looks like it should come out.  Has anybody had this problem?  Any ideas?
>
> Thanks very much for any suggestions,
> Wes
> 84 1.9l