Replace the dryer with a new one.
Replace the hose with a new one.
I think the switches from later model over the visor units use the same
switches and controls.

Stan Wilder
Engine Ceramics
214-352-4931
www.engineceramics.com
----- Original Message -----
From: "Jim Felder" <felder@KNOLOGY.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Monday, July 25, 2005 2:10 PM
Subject: WTB Behr AC switch and switchplate

> I recently ebayed a Behr underdash unit that looks pretty good except
> for one thing the seller pointed out--that the rig needs a drier--and
> one thing he did not, that the dash-mounted switchplate is torn out
> where the right-hand switch would be, and the switch is also missing.
> But with the torn up switchplate, even if I had the switch, it wouldn't
> mount into the plate.
>
> Another observation is that the two switches (off and three speed
> positions = 4 postions) seem to be the same in that the plugs that
> power them are identical as are the position marks on the switchplate.
>
> Anybody have these?
>
> Anybody have a good drier cannister?
>
> How about the connecting tubes from the underdash unit to the condensor?
>
> Thanks,
>
> Jim