I have heard that the thermo-heat transfer glue between the pipes and the
fins can

Dry up and stop transferring heat/cold.  I have seen this in the archives

Tom

From: J Roth <rbluewesty@GMAIL.COM>
Reply-To: J Roth <rbluewesty@GMAIL.COM>
Date: Fri, 29 Jul 2005 16:43:18 -0400
To: <vanagon@GERRY.VANAGON.COM>
Subject: Dometic freezing up

Tried the archives but no (easy) hits.

The dometic in the 87 westy is icing up the pipes (in both propane &
110v mode) -- not frosting the fins -- ice forms on the horizontal tubes
behind the fins.

Nobody has suggested that the dometic is too efficient (yeah, right), so
I'm assuming there's a flow problem. And yes - it's on level ground.

Suggestions?

TIA,
J

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.338 / Virus Database: 267.9.7/60 - Release Date: 07/28/2005