Thanks,

But were the snaps on the inside in which case they'd have to be tapped into
the upper frame of the door. Then where do you put the snaps that are on the
other side of the screen? The two down near the bottom of one side? If
they're put on the outside then the door can't be closed with the screen up.

Mike

On 8/3/05 6:49 PM, "Bob Stevens" <mtbiker62@HOTMAIL.COM> wrote:

> "Anyone know where the male snaps should be mounted on the van to clip the
> screen to?"
>
> I just held mine up over the opening to see where I wanted it to "hang" so
> it rested on the floor some and covered the sides of the opening
> sufficiently, marked the center top, drilled it, put the snap in, hung the
> screen from that one and kept moving across the top in alternating rotation,
> then down the sides. I drilled into steel on all snaps so it fits real nice
> and is great at keeping circulation up and bugs down.
>
> That one, and the hatch screen really helps keep the van from "collecting"
> hot air. Great circulation at night when it's warm too.
>
> bob
>
>
>
> ----Original Message Follows----
> From: Mike Miller <mwmiller@CWNET.COM>
> Reply-To: Mike Miller <mwmiller@CWNET.COM>
> To: vanagon@GERRY.VANAGON.COM
> Subject: Screen on door of Westy
> Date: Wed, 3 Aug 2005 18:24:54 -0700
>
> Vanners.
>
> I bought a screen for the door of my 85 westy. It has sixteen snaps. 14 on
> one side, two on the other side at the bottom of one side of the screen.
>
> Anyone know where the male snaps should be mounted on the van to clip the
> screen to?
>
> TIA
>
> Mike
> Marin county CA
>
>