I bought Gates truck hoses (not the teflon stuff-too difficult to work
with!) from a local truck supply shop.  I made my own where I could.  The
heater hoses were all 5/8" so that was easy.  For the 5/8" to 1", use a
brass 5/8" to 1" adapter from Home Depot or Lowes or a plumbing supply shop
and use the appropriate sized hose on each end of it.
----- Original Message -----
From: "TC" <trclark@SHAW.CA>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Thursday, August 04, 2005 9:03 PM
Subject: Re: getting Desperate for some 83-85 coolling hoses :)

>> Any one have  some new auto trans cooling hoses
>> (Or know where they can be fabricated)
>> 025 121 104B
>>  Feed, between bleeder assembly and pipe to tranny cooler (automatic
> only):
>> AND
>> 025 121 074B:
>> 18. Return, Between bleeder assembly and pipe to tranny cooler(automatic
>> only):
> OK realy realy desperate  stuck here till I can figure something out
> what has anybody else done when these fscking hoses are totally cooked
> now turns out I need all these hoses items numbered 14, 15, 18, 19
> http://www.vanagain.com/19lchc.htm
>
> 3 of these lines are 5/8" to 5/8" BUT one line goes 5/8" to 1"
> I had a suggestion we might be able to get aways with
> braided hydraulic lines any i thoughts suggestions from any
> old timer 83-85 owner :) ?
>