Mike;

Do you have a picture of this set-up?  I have a Honda 100 that I'd love to travel with, but want to keep the travelling as light as possible.

Lorraine
1981 Westy "MIA"

Mike Collum <collum@VERIZON.NET> wrote:
Back in the '60s, when I had a Vespa motorscooter, I had a shop bend a
piece of plate 90 degrees in the middle and put holes in it at the
proper places.

One hole was where the hitch ball bolted to the hitch. The plate then
extended out, twisted to the vertical where a large hole was made to
clear the hub and 4 smaller holes around it lined up with the lugs on
the front of the Vespa.

I removed the Vespa's front wheel, bolted the lugs to the "adapter" and towed it, rear wheel down

---------------------------------
Find your next car at Yahoo! Canada Autos