Dennis is right, i replaced my temp2 and it fixed my hot bucking issue, please note
this was after testing many componets. ecu know good other parts ok also.

-----Original Message-----
From: Dennis Haynes <dhaynes@OPTONLINE.NET>
Sent: Aug 10, 2005 3:54 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: SERious Bucking after warm up...

O2 or Temp 2. Easy test, if turning the key off and on makes it run
normal for 30 sec or so, problem is O2 circuit.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
Of Zoltan
Sent: Wednesday, August 10, 2005 2:13 AM
To: vanagon@GERRY.VANAGON.COM
Subject: SERious Bucking after warm up...

I guess, it is my turn.  For years I was reading of this menace and now
I am baffled.
One thing I did and installed that foot long addition that is supposed
to take care of it.
BUCKING did not stop.  And it is violent and powerful.
I wonder if a check list has been developed by now.
I am assuming that by now we know where to start and carry on until the
culprit is found.
I feel helpless, yet I know the List will come and fix it...
What shell I do?
Zoltan