Looking at mine I woukd assume that it should adjust.  It may need to be
bleed again.

Jimt

On 8/12/05 4:29 AM, "Frank Condelli" <RAlanen@AOL.COM> wrote:

> The one thing I did notice when I was putting in the rebuilt  tranny that
> might be relevant is that the little hardened nib/ball on the  clutch
> throwout outside lever -- i.e. the "bearing" surface the clutch  slave
> piston directly presses onto -- is quite worn down on my rebuilt  tranny vs
> what the original tranny looked like.  Could this cause the  clutch to not
> disengage fully?  Or should the hydraulics self-adjust  to compensate?  I
> REALLY don't want to pull the tranny  again!!!
>