<< I then filled the valve stem cap with about two cents worth of JB
Weld so the air would stay in there. That was the best modification I
ever did. Free alignment, the van steers nice and straight now. >>

I'm in the same library Georgie.

Just used a little different product.

Devcon 5 minute steel epoxy.

But the front end still shook a little.

My next move cured the shimmey shimmey co-co pop.

I removed the plastic stem caps and used stainless caps filled with the
Devcon epoxy.

The front end is perfect.

That little extra weight did the trick.

You think you have a patent on instant roadside repair's?

Back of the Bus.