Hi All

I've bought a vanaru from a friend and found the solenoid to be a bit
succeptable to heat... it sticks when you've been driving the vehicle
for a bit.

I've had similar problems in my past life as a small block chevy
tinkerer. The solution was to bridge the bat + on the solenoid to the
start terminal, and trigger both by another remotely mounted solenoid.
I have been thinking of doing the same with the vanaru and was
wondering if anyone else had found it necessary. The premise is that
the tickle/start wire from the ignition doesn't carry enough current to
actuate the solenoid when hot, maybe this is off.

-Tim