Tim Milot wrote:
> Hi All
>
> I've bought a vanaru from a friend and found the solenoid to be a bit
> succeptable to heat... it sticks when you've been driving the vehicle
> for a bit.
>
> I've had similar problems in my past life as a small block chevy
> tinkerer. The solution was to bridge the bat + on the solenoid to the
> start terminal, and trigger both by another remotely mounted solenoid.
> I have been thinking of doing the same with the vanaru and was
> wondering if anyone else had found it necessary. The premise is that
> the tickle/start wire from the ignition doesn't carry enough current to
> actuate the solenoid when hot, maybe this is off.
>
> -Tim

yep, an old problem....

I had replaced the starter, solenoid and ignition switch in quick
succession after purchase of my Vanagon 5 years back.  When the problem
came back last year I installed the relay kit and haven't had an issue
since.

I got mine from Bus Depot.

http://www.busdepot.com/details.jsp?partnumber=WR1

--

Wil

-- http://www.charmfx.com/