Don, I have only had to do this twice in 8 years, once when replacing a
damaged Hall sender to idle stabilizer cable and once when I put in a
rebuilt distributor.  As I remember, spring wire clip lifts out and away
from the distributor.

Unless you are replacing a damaged cable and/or known bad distributor, I
don't see any reason to touch the cable.  If van is not running right,
probably several other causes.

John
----- Original Message -----
From: "Don Spence" <dkspence@TELUS.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Thursday, September 08, 2005 7:01 PM
Subject: Re: removing the harness from Hall sender?

> I'll ask again since no one responded.
> How do you unclip the harness plug from the Hall sender?
>