I've used gummed back clear laminate from the office supply store on many
projects and just run them through a copier after making a master on my home
printer.
Commercial copiers have better fusing of the toner and the print holds up
better.
If your panels aren't too big you might find a label as large as 4x6
postcard size. I think those come two per sheet and I've seen several
popular colors.

Stan Wilder
Engine Ceramics
214-352-4931
www.engineceramics.com
----- Original Message -----
From: "Mike Collum" <collum@VERIZON.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Tuesday, October 11, 2005 9:26 AM
Subject: Re: Printing on Aluminum Sheet - NVC

> Considering the price, I think I'd pick up some decal material for my
> printer ... apply the decals then use "Solvaset" (from a hobby shop that
> sells model trains) to make the edges of the decals disappear.  In fact,
>   it will no longer look like a decal but will look like the printing
> was painted on.  All the decal "shiny" will be gone.
>
> On the positive side ... mistakes are easily (and cheaply) rectified and
> replacement or changes are easily performed, too.
>
> Mike