I'm looking for a circuit diagram for the board behind the instrument
cluster, as well as the associated harness that feeds into it.  The
reason i ask is because what i see doesn't seem to jive with what
Bentley says it should be.  what years came wired with an OXS light?
Which side is the OXS light usually wired to?

I have an 89 wolfsburg LE, the first 4 lights are filled and active
turn signal, beams, alt, oil.  The two below it have blanks in the bulb
holder, but on the associated circuit board, the lower left one is
physically wired (minus the resistor).  However, the point it meets
the harness (according to Bentley the OXS sensor wire) is actually there.
What i want to do is drop an additional indicator light in this spot.  I
should just be able to splice into the wire, drop in and LED and a
resistor, but I'd like to see if I'm missing something obvious that
would prevent this.

--
William Burg

cthread.  cthread_fork().  Fork, thread, fork!
echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sbA0D3F204445524F42snlbxq'|dc