I used these instructions and they're great. I finished in about five
hours, it wasn't an all day job. You should search the archives, too,
for more help.

You might find the size of the big wrench you'll need, I think it's 22
mm.

Also, a big time and money saver: I measured the distance from the
center of the tie rod ends to a known spot (the innermost thread, for
instance) on the rod ends out of the rack. Reinstall to the same
measurement and you want need an alignment, assuming you didn't need
one before.

Jim

On Oct 20, 2005, at 3:14 PM, Ed wrote:

> Here's the location for the description of the ps rack install:
>
> http://www.vanagonauts.com/Steering-Rack-R&R103.htm
>
> This was written a few years ago. I think I payed about $280 at NAPA
> for one
> with a lifetime warranty.
>
> Ed
>