Why not just pull it out 1/8" and put some silicone sealer on it the
perimeter ........... push it back in and hold it with some tape until the
sealer cures. If you apply the sealer with a Q tip or such you might be able
to hide the whole process.

Stan Wilder
Engine Ceramics
214-352-4931
www.engineceramics.com

----- Original Message -----
From: "John Reynolds" <kayakjr@JUNO.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Tuesday, October 25, 2005 7:13 PM
Subject: Re: Power Outlet (Cigarette Lighter) Rotating

> I used large narrow piece of heater around the unit with a nylon zip tie
> pulled tight.  Worked well.  You will likely need to pull the lighter to
> see where this fits, but remove the glove box, do the contortion thing,
> and you might be able to see how thin a  piece you need.
>
> You can even cut the hose and fit it over without removing even the
> wires, if you are skilled.
> If  you need a piece of the hose, let me know and perhaps I can mail you
> some, if I still have any. p-mail for that request though
>
> John
> 81 West FOR SALE
> 87 Westy Weekender