

| Subject: | Re: Transmission leaking from drive shafts |
| From: | Michael Snow |
| Date: | Sun, 6 Nov 2005 10:02:23 -0700 |
Warning: Have a drain pan ready to catch the goop when you loosen the CV bolts. I have never been able to wash that stuff out of my coveralls. You'll need new CV grease, and it's a great time to install new boots if required. You'll also need to fill the transmission to its normal level, so it is also a good time to completely drain and fill the transmission with fresh gear oil if it's that time. Michael Snow 1987 Syncro GL camper 1986 GL 1982 Wesfalia 1.9D On 11/6/05, Jim Felder <felder@knology.net> wrote: > Friday I noticed a small puddle of transmission oil underneath my 90. > On inspection today, I can see that it is slinging out around the drive > shafts, especially the passenger side. > > Is this the situation where others have been advised to remove the > drive shafts (good time to rebuild and reboot) and replace a seal under > the outer flange? Any special tools needed or warnings required? > > Thanks, > > Jim >
Have something to add on this topic today? Revive this thread in the forum »