In a message dated 11/11/2005 12:09:45 A.M. Eastern Standard Time,
LISTSERV@GERRY.VANAGON.COM writes:

Still  going through head light hell.  So here is the senario has  high
powered relays, works fine in low beam both sides work, if I turn on  the
high beams they both work on the drivers side nothing on the passenger  side,
as in either high beam or driving light.  I have redone the  grounds and that
really helped the low beams.  All the fuses look good  all the bulbs work as
I have switched the the lights just to test.   Not sure where else to look
high beam switch?  Wiring?  Any  advice would be great.

Kevin, are you sure the fuse for that side is good  ?  Did you check the
output from the fuse block to the passenger side high  beams ?  Follow the current
path and you will eventually find the  problem.  It's not any of the switches
or relays if the other side is  working.

Cheers,

Frank  Condelli
Almonte, Ontario, Canada
'87 Westy, '90 Carat, '87 Wolfsburg  (Forsale) & Lionel Trains
Vanagon/Vanagon Westfalia Service in the Ottawa  Valley
_Frank Condelli  & Associates_ (http://members.aol.com/Fkc43/busindex.html)
_Vanagon Stainless Steel Exhaust  Systems_
(http://members.aol.com/Fkc43/stebro.htm)
_BusFusion_ (http://members.aol.com/BusFusion/bfhome.htm)  a VW Camper
camping event, Almonte, ON, June 08 ~ 11,  2006