Hi Frank,
It just got a little stranger.  Now the drivers side driving light is on all
the time dim on low beam bright on high and on the passenger side it is just
always dim but will now stay on with the high beams on.  I'm also still not
getting the indicator light to work.
   Any one have a guess?
Thanks
Kevin .
  -----Original Message-----
  From: RAlanen@aol.com [mailto:RAlanen@aol.com]
  Sent: Friday, November 11, 2005 2:58 AM
  To: vanagon@gerry.vanagon.com
  Cc: vwfixer@centurytel.net
  Subject: Re: Still no passenger side high beam

  In a message dated 11/11/2005 12:09:45 A.M. Eastern Standard Time,
LISTSERV@GERRY.VANAGON.COM writes:
    Still going through head light hell.  So here is the senario has high
    powered relays, works fine in low beam both sides work, if I turn on the
    high beams they both work on the drivers side nothing on the passenger
side,
    as in either high beam or driving light.  I have redone the grounds and
that
    really helped the low beams.  All the fuses look good all the bulbs work
as
    I have switched the the lights just to test.  Not sure where else to
look
    high beam switch?  Wiring?  Any advice would be great.

      Kevin, are you sure the fuse for that side is good ?  Did you check
the output from the fuse block to the passenger side high beams ?  Follow
the current path and you will eventually find the problem.  It's not any of
the switches or relays if the other side is working.

  Cheers,

  Frank Condelli
  Almonte, Ontario, Canada
  '87 Westy, '90 Carat, '87 Wolfsburg (Forsale) & Lionel Trains
  Vanagon/Vanagon Westfalia Service in the Ottawa Valley
  Frank Condelli & Associates
  Vanagon Stainless Steel Exhaust Systems
  BusFusion a VW Camper camping event, Almonte, ON, June 08 ~ 11, 2006