I replaced mine with closed cell foam (about 1/16" thick) - the kind
used for packing dishes before a moving company breaks them.

No glue needed.  Simply trim them about 1/8" larger than needed (1/8"
overlap on all four sides, so I guess it's 1/4" oversized), then snap
the plastic pieces together.  It's not quite a perfect fix, but way
better than nothing.

Karl Wolz

> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On
Behalf Of
> Roger Sisler
> Sent: Saturday, November 12, 2005 9:45 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: '85 vanagon passenger compartment fan...
>
> While you are at it, you may want to replace the foam seals on each of
> the "flapper"(ha ha) doors.Dont know what this proper materials is,
but it
> will stop air from entering when you dont want it to. EZ replacement
> proceedure. The doors are held in with little plastic clips .Just pull
them
> out and the doors come off, I think you need to glue the new foam onto
the
> plastic paddles with a good adhesive.Next years job , for me.That
plastic
> lower dash cover is still to intimidating.