At  12/10/2005 06:30 PM,Jim Felder wrote:
>Yes, that's assumed. First you have to pull the knobs off by brute
>force. Put them on the dash in the order they came off so you won't
>have to experiment to get them to fit.
>
>Then CAREFULLY lever the plate off with a thin blade like a knife.
>There are two pegs that hold the faceplate into the base, be careful
>to pry alternately and don't try to get one side or the other all
>the way out. Epoxy won't help much with this plastic.

I just took mine off.
I pulled the knobs off with a pair of bent needle nose pliers, grip
behind the wide part (where your fingers go) and pull. I had to
wiggle up or down so the knob inside would clear the plastic of the face plate.
The pegs are located at the left lower corner and on the right side
at the top just about in the middle between the fan switch and where
the face plate slots start (as I sat their looking at it).

Rob
becida@comcast.net
'87 Wolfsburg Vanagon in western WA