In a message dated 17/12/2005 11:29:58 P.M. Eastern Standard Time,
LISTSERV@GERRY.VANAGON.COM writes:

For an  86 there are 2 whitish wires coming out of a harness that go to
the PS  switch on the rigid lines at the PS pump.Connect them up to the
male spades  on the switch, any order. Right angle female spades were
used on those  wires by the factory because there is limited  space.

I stand corrected, Mark is absolutely  correct.  It was very early and my
brain was still in half sleep  mode.  I obviously was describing the 1.9 wiring
scenario. The 1.9  wiring and 2.1 wiring to the power steering switch are not
the same.

Cheers,

Frank  Condelli
Almonte, Ontario, Canada
'87 Westy, '90 Carat, '87 Wolfsburg  (Forsale) & Lionel Trains
Vanagon/Vanagon Westfalia Service in the Ottawa  Valley
_Frank Condelli  & Associates_ (http://members.aol.com/Fkc43/busindex.html)
_Vanagon Stainless Steel Exhaust  Systems_
(http://members.aol.com/Fkc43/stebro.htm)
_BusFusion_ (http://members.aol.com/BusFusion/bfhome.htm)  a VW Camper
camping event, Almonte, ON, June 08 ~ 11,  2006