This result does not have to mean that a switch is bad. The brake master
cylinder has 2 separate pressure circuits and one switch is on each
circuit. One hydraulic circuit is for the front brakes and the other is
for the rear brakes. If the rear brakes are not adjusted  or working
properly, the front brakes can be at pressure long before the rears.
This means that one switch will close long before the other. It is very
common for the Vanagon rear brake self adjusters to not be working.

Mark

 Christopher Gronski wrote:

>OK, when testing continuity (ie: not volts) on the switches the one
>towards the driver seems to be functioning, it does not drop quite to
>zero with the pedal but very close (0.23 to 0.13). The second switch
>further away from the driver is not showing continuity (ie: I am
>gettin 1 all the time)
>
>