Chris you are probably not far from the truth on that. I am REALLY
careful to torque / bend the glass as little as possible during this
operation. Basically you just work the seal and disturb the glass as
little as possible.

Chris

On 1/22/06, JordanVw@aol.com <JordanVw@aol.com> wrote:
> In a message dated 1/21/06 4:38:35 PM Eastern Standard Time,
> gronski@GMAIL.COM writes:
>
>
> Basically you just work a couple of screwdrivers
> around the inside seal, folding it back as you go. The window just
> pops out so have someone on the other side to catch it.
>
>
>
> must be that canadian touch of yours.   ive done the same thing and POP!
> million  little bits of glass everywhere..
>
> chris