hi all.. i did the "conversion" from 24hr to 12hr  time last nite on my
digital clock..  was SIMPLE!  took a few minutes.  simply just sever the lead on
the 24hr spot, and solder a blob on the 12hr spot.. done..

for those of you who wanted a 24hr/millitary time clock, next time i get one,
i will post it to the list before i convert it. i had a few people p-mail me
who actually wanted to swap their 12hr clock with my 24hr one...  i had no
idea there would be anyone interested in it!!!!!..

thanks, all

chris

In a message dated 2/6/06 9:28:48 PM Eastern Standard Time,
sagmoore@ZOOMINTERNET.NET writes:

> Chris,
>
> From what I understand from the article, yes. Disconnect the 24 and connect
> the 12.
>
> Dave
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of
> JordanVw@AOL.COM
> Sent: Monday, February 06, 2006 7:18 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: how do you get the digi clock off of Millitary time?
>
> >In a message dated 2/6/06 12:06:42 PM Eastern Standard Time,
> >sagmoore@zoominternet.net writes:
> >
> >
> >
> >
> >>Go to Vanagon.com, click on "Problems" and then "The Clock". There are
> >>the instructions to convert to a 24 hour clock on down the page. You
> >>would have to unsolder the copper jumper to the 24 and resolder to the 12.
> >>
> >>
> >>
> >>
> >
> >thanks...  i didnt realize the fix involved soldering..   grrr..
> >
> >thanks, though..
> >
> >chris
> >
> >
> >
>
>
>
>
> ok...i got the clock apart... i see on the green PCboard there is a "12" and
> a "24"  the "24" has a lead connecting the two halves of the spot.   the
> "12"
> is unconnected.
>
> what do i do, scratch away the connecting lead on the "24" spot and put a
> drop of solder on the "12" spot??
>
> thanks..
>
> chris
>
>
>
>