Sorry, I wasn't clear enough. The bracket I moved is the one screwed to
the bottom side of the table. Moving it closer to one end gives the
table a larger arc to swing in. This lets it move closer to the bed and
also allows the other short edge to fit snug against the side panel and
right behind the driver's seat. It also doesn't rattle since the one
edge is pushed tight against the side wall before the adjustments knobs
are tightened.

Mark

bueses wrote:

>>I am talking about the full camper front table. It mounts to the
>>driver's side front seat box corner, not the side wall. It pivots around
>>on it's curved leg. I moved the underside table bracket position so the
>>table stows right behind the driver's seat, still in the horizontal
>>position. It can be used in that position or swung around till it is
>>closer to the bed/seat. Of course this is all without a middle seat
>>installed.
>>
>>Mark
>>
>>
>
> Any pics of how this works Mark?  Where is the corner bracket moved to on
>the pedestal?
>
>Inquiring minds need to know.
>
>Tom
>
>
>
>
>