Dennis, 

The Pressure Regulator unit on my van is working fine, the problem is that
in having all the OEM brake lines, all rear drums, shoes, front rotors,
Girling Calipers, with new pads installed they found the Pressure Regulator
was very rusty.

So when the went to remove the brake line connections they could not as the
connectors on the Pressure Regulator were way to rusty. So they told me to
get a new one.

Any idea what type of T connector I need on the front and rear, I have gone
to busdepot, gowesty, van-caf�, vanagain and I do not see the part listed
anywhere...

Here's the list of what I was told was needed to finish the job:

1 Brake Pressure Regulator
�Vanagain Part #:251612501*** - $99 Vanagain.

Total of 4 - 2 inner/2 outer bearing for rotor (was told by mechanic)
�Vanagain Part #:
251405645B*- outer $12 each $24 pair
113517185C****** inner $14 each $28

2 grease seals for rotor
�Vanagain Part #:�251407641A**** ��(2) $3 each  $6

2 special nuts hold rotor in place
�Vanagain Part #: N201121***  $2.50 each $5

2 T Brake Line connectors for the front & 1 for the Rear (total of 3)
Part# No idea???? I think this should work.... Found this...
Classic Tube.com $9.95 each 3/16"
http://www.classictube.com/prodview.asp?idno=122&searchtype=tubing&partno=BR
KL-3

20 ft Stainless Steel Tubing - $59.00
http://www.classictube.com/prodview.asp?idno=135&searchtype=tubing&partno=C3
S

The pricing for the tubing seems expensive is it?

on 3/8/06 7:23 PM, Dennis Haynes at dhaynes@optonline.net wrote:

> The brake pressure regulator part number is 251-612-501. Last time I
> bought one it $94.60 list. This part does fail and one of the symptoms
> is a soft pedal. I wouldn't suggest used, especially if it was off the
> vehicle for a while or the brake lines were opened. The tees are also
> low $$$ items. 
> 
> Dennis
> 
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
> Of robertmstewart
> Sent: Wednesday, March 08, 2006 11:45 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Any have a Good Used Condition Brake Pressure Regulator for an
> 88?
> 
> So I am in the process of redoing all the brakes on my Van and I need a
> couple more parts...
> 
> Does anyone have a good condition used Brake Pressure Regulator for an
> 88
> automatic?
> 
> I also need the T connectors for the brake lines, (2) Front (1) Rear.
> 
> If you have these items in good condition and not very rusty please let
> me
> know the price.
> 
> Thanks,
> Robert
> 
> --
> Rob
> NYC/Long Beach, NY
> 88 Wolfsburg, Silver
> 
>