What he said, plus alignment!

Howard

----- Original Message -----
From: "Craig Morton" <rangermorton1972@YAHOO.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Friday, March 10, 2006 10:37 AM
Subject: Upper Ball Joints Reply

> The upper ball joints are quite easy to replace. Mine are held in place
with two socket head bolts - you will need an 8 mm male hex socket or Allen
wrench. You may need a tool to separate the ball joint from the upright.
Easy fix if all goes well. Now the lower ball joints.... that's a horse of a
different color.
>
>   Craig
>