Twist it up and out with a properly sized e-z out.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
Of Robert Keezer
Sent: Tuesday, March 14, 2006 8:37 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Chunka Bologna

Ok so I'm putting a 1.9 back together after
asking around and reading anything else to look
at before putting the case together and it looks
Like I get to be the one who has the  future
advice.

Where in anyone's instructions is the topic of
broken off dipstick tube in case discussed?

 I have'nt found it- because that's what I
discovered after its all sealed up- there's about
an inch or so of tube in the dipstick hole, as I
remember seeing  broken dipstick tube in the box
(This was a basket case) with brazing on the end.

So it had broken, and the PO brazed it.

I have a good replacement tube. How do you remove
the broken part still in the case.
there's about 1/4 inch above the case.

Can it be driven down and out- I still can
retrieve it as the cylinders are'nt in yet.

I'll be relieved to know I can just drive it out
thru the bottom.

Robert

1982 Westfalia

Seattle

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com