

| Subject: | Re: Here are some snap switches that may fit to, be used in place of the $75 VW throttle switch |
| Date: | Wed, 15 Mar 2006 11:04:17 -0500 |
The VW dealer sells a cover for the entire throatle switch.
I think this was only installed on the late model vanagons.
Rebuild the switch and I would highly reconmend this
cover. It is less than 6 dollars.
Joe
roger sisler wrote:
>These are from www.grainger.com . Select a Grainger part part number search, and type in the part numbers. Grainger has about 50 different switches to choose from. Maybe one for the late vanagon, but I am sure they have several for the early WBX.
>
> Try these part numbers: 6X291 6X292 6X293 3XG39 and see the pictures.
>
> There are many more, and I have not searched them all.I think the little metal lever on the late vanagon throttle switch,is called a hinge lever switch. Some of these hinge lever switches have the little curve ,as opposed to a straight lever,like the late vanagon.
>
> The Grainger prices for these switches are from $2.50 to about $5.50. The throttle switch that is avaliable through vendors,from VW is about $75.The difference I can see between these switches is that a 1 footlong wiring harness needs to be added that has push on connectors. If you cut the connector from the bad switch , it can be added to this new harness. Then just plug this makeshift harness into the main wiring harness.
>
> I think at the www.grainger site, you can order the cataloge. A worthwhile effort. This catalogue is about 2000 pages of neet stuff,and it is free..
>
>
>---------------------------------
> Yahoo! Mail
> Use Photomail to share photos without annoying attachments.
>
>
>
>Have something to add on this topic today? Revive this thread in the forum »