Have you determined exactly which parts you are missing?

The should be 2 flexible metal pipes sticking up from the fridge heater
area. These plug into an aluminum housing with o-rings sealing them in
their holes. The housing sticks through a hole in the body. A rubber
gasket and 3 stamped sheet metal parts attach to the outside.

Mark

 Rod Knutson wrote:

>I lurk the list most every day but never post... so
>this is my first try. I read the Fridge 12V stuff with
>interest because the previous owner(s) of my 85
>Westy/Subaru at one point removed the Fridge and
>covered all the outlet/inlets in the left side of the
>van.. vent and all. Later someone reinstalled the
>fridge and outlets but did not reinstall the exhaust
>vent. Thus my fridge now only runs on 110 and I have
>not had time to trouble shoot why 12 volt does not
>work but your comments will help.
>
>My question now is where I can locate an inlet/exhaust
>system so I can again connect the propane back to the
>fridge. Thus far (past six months) I have written
>multiple vendors, watched ebay and samba but no luck
>finding a vent system.
>
>Any ideas, anyone?
>Thanks, Rod
>
>__________________________________________________
>Do You Yahoo!?
>Tired of spam?  Yahoo! Mail has the best spam protection around
>http://mail.yahoo.com
>
>
>
>