Using new gaskets I have not seen a need for anything else.  If you are re-using an old gasket, I have had 100% success with typical muffler paste you can purchase at any FLAPS.

Z

Mike Bucchino <mbucchino@CHARTER.NET> wrote:
  Has anyone tried using the thick solid copper racing exhaust gaskets?
They can be installed/ replaced with out removing the exhaust header from
the studs due to slotted bolt holes. I believe that they're also available
in larger diameter port openings, which would work out well with the Vanagon
ports.
Als, what about Copper-Coat? I've heard of this copper-based sealant
that's used by heavy equipment mechanics for gasketless exhaust joints.
Just wondered if anyone has experience with using either of these on
Vanagons or anything else for that matter.......

Mike B.

>> OK, quick question... one I don't recall seeing addressed here. What
>> sealer (if any) should be used on the various exhaust gaskets for a 1.9
>> engine?
>>
>> Tim

---------------------------------
How low will we go? Check out Yahoo! Messenger�s low  PC-to-Phone call rates.