

| Subject: | Re: wiring problems 90 2WD |
| From: | Kenneth Wilford |
| Date: | Mon, 10 Apr 2006 17:09:19 -0400 |
This is actually part of the harness that I advertised last week for $250.
It appears that the black wire goes into the small black box that is on the
firewall on the driver's side. It plugs in there.
Thanks,
Ken Wilford
John 3:16
http://www.vanagain.com
http://www.strictlyvwauctions.com
http://www.eurovan.org
http://www.vwcabrio.org
Phone: (856)-327-4936
Fax: (856)-327-2242
-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
--------------------
Sent: Monday, April 10, 2006 7:10 AM
To: vanagon@GERRY.VANAGON.COM
Subject: wiring problems 90 2WD
I had a vanagon tow to my house late Sat. night.
DOA. Wiring problem. I got it running, but with a jumper cable.
There is a black wire that runs from the coil (+) to the fuel injection
relay.
Its bad. It runs from the coil into the wiring harness
and at some point back to the relay. I would like to fix it, rather
than jumper it out. Any idea where VW makes these two wires
connect? Any ideas on this one?
Joe W.Have something to add on this topic today? Revive this thread in the forum »