

| Subject: | Re: Diagnose Clutch Slave or Master? |
| From: | Ken Wilford |
| Date: | Wed, 12 Apr 2006 21:24:23 -0400 |
I just did this job on my 86 Syncro today. I replaced both of them. In my experience I have found that if one is bad, usually they are both going that way and within a few months of replacing the one, you find yourself replacing the other. Replace both, flush the line out with new fluid and you should be good to go for many years to come. Just my opinion, Ken Wilford John 3:16 www.vanagain.com Brian Doss wrote: >My (1988) clutch is loosing "oompf". It seems to bleed down overnight, such that to start it up in the morning, I have to pump the pedal a few times, and put it in neutral to start it up. If I don't do this, the van lurches. After underway, it seems OK, but I have noticed some unusual resistance while shifting. I'm thinking maybe I should bleed and replenish the system, but if that doesn't work, I'm wondering how to determine if it is the fault of the master cylinder or the slave. Neither shows any outward signs of seepage. Any thoughts? > >Brian Doss >'88 Weekender > > >
Have something to add on this topic today? Revive this thread in the forum »