You probably have a blown seal in either the master or slave.  The
master will leak to right under the brake pedal - easy to see.  The
slave may leak down on the bracket it sits on and onto the tranny, but
it might also hold the oil inside the bellows on the cylinder.  This can
happen, particularly when the slave is just starting to fail.  BTDT
several times.  You can check by pulling the bellows back.  You might
have a tablespoon or two of oil rush out.  But if there is oil, you have
found the leak.

I seriously doubt that bleeding the system is going to help you.

There are several good web pages on changing out the slave cylinder, and
also some for the master, but I'll bet on the slave since you haven't
noted a pool of fluid underneath the pedals.

Sam

--
Sam Walters
Baltimore, MD

89 Syncro GL, Zetec Inside
85 Westy Weekender
85 Mercedes Benz 300D Turbodiesel - to become veggie oil powered

All incoming and outgoing email scanned by
automatically updated copy of Norton AntiVirus.