I got tired of my wife's Town/country Minivan' roof rusting from the
peeling paint, so I did the POR deal on it.  Used the clear POR and then
the two part white paint.  Except for the paint"kicking a little sooner
than I wanted, the job turned out well enough to suit our needs.  I used a
combination of brush and foam roller.  I strongly suggest that you buy the
yellow foam roller from Gougeon Bros of Bay City Michigan(or one of their
dealers that sell their epoxy etc).  They are epoxy-bonded to the cardboard
roller and hold up very well.

Good luck

DM&FS

At 11:10 AM 4/27/2006, Roger Sisler wrote:

>If you have ever used POR 15, you know that you can apply it with a brush
>and not see brush markes. Now, POR 15 makes colored paints too. They call
>them Hardnose paints. Also, they have a yacht and engine paint that will
>probably work.   www.por15.com
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Anti-Virus.
>Version: 7.1.385 / Virus Database: 268.4.5/322 - Release Date: 4/22/2006

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.1.385 / Virus Database: 268.4.5/322 - Release Date: 4/22/2006