At  5/5/2006 08:27 PM, Rob wrote:
>I changed my radiator in my '87 this evening after work.

I was asked by p-mail why I changed my radiator, fair question. While
trying to bleed it my helper seems to have tightened the bleeder
screw a bit too much and the plastic cracked.
I did try to fix it with JB Weld but that didn't work. At that point
I figured it was an almost 20 year old radiator and I have (before)
fought with radiator leaks, I didn't want to do it with this one.
So I got a new one.

Rob
becida@comcast.net

Putting a '91 Subaru 2.2 into an '87 Vanagon in western Washington.
Slowly, very slowly