The Syncro set looks identical to the set I got recently from BenT. The big
improvement over other BB Kits is that the rotors are machined out on the
inside (can't see that in these pix) to avoid contact with the hub. Also,
the brake lines look like straight steel, or maybe braided? Not sure but am
sure they don't look anything like the rubber one's that came in Ben's
Overland kit. By the way, these rotors and pads, when compared side by side,
make stock look like they came off a '77 Rabbit. Big difference.

I liked the direct bolt on, using only the 4 16mm bolts that held the stock
carriers on, and eliminating the steel "S" lines at the calipers. The new
rubber line runs all the way from the steel brake line down to the caliper.
My opinion is that you will be verrrrry happy with this upgrade, I sure am.

And, I finally figured out that the pad retainers DO fit on very nicely, I'm
just not that good of a mechanic and couldn't figure that out initially. Pic
here:
http://groups.msn.com/BobsPhotoShare/overlandbigbrakekit.msnw?action=ShowPhoto&PhotoID=1018

or: http://tinyurl.com/rv4go

right front brake:
http://groups.msn.com/BobsPhotoShare/overlandbigbrakekit.msnw?action=ShowPhoto&PhotoID=1016

or: http://tinyurl.com/rk6e3
notice this shot has no retainer applied.

Bob

> Has anybody noticed that volkscafe has a new audi based front brake
> replacement listed in the "New Items" catagory. Is this the same kit that
> others have recently been talking about from overland? My entire brake
> system is new, but when I fry the system I would like to upgrade to a
> better
> brake that has parts that will be easy to find in the future.
>
>
>
> MARIO
>