

| Subject: | Re: Need info on bleeding - Air problems with Subaru |
| From: | Bostig Eng. |
| Date: | Wed, 17 May 2006 13:10:33 -0400 |
Is it bubbling while you're running it cold(say at idle, from cold start, is new air being introduced to the system)? No worries about not having the proper coolant mix yet, water cools better than water/coolant mix anyhow... Jim At 11:53 AM 5/17/2006, Josh, Courtney & Althea Wilson wrote: >Hello all, > >Does anyone have some general information they can point me towards or send >me regarding the issue of air in the cooling system of a Subaru conv. and >the process of bleeding the air? I�ve had my Subaru Vanagon for less than a >year, and though I�ve heard that Subaru people sometimes have problems with >air in the system, I never experienced it -- until recently. I�ve been >travelling through Mexico, and some 2500 km ago the cap on the expansion >tank seemed to stop working and the engine started overheating. The mechanic >emptied the system, refilled it, and replaced the cap. About 1000 km later, >the overheating started again. The next mechanic said the first must not >have bled the air out very well. He put more water in, bled it on an incline >with the rear higher than the front. All seemed well, and then some 1500 km >later, same problem. So I filled and bled it myself this time, car is >running well for now, but I fear something is being done wrong. I�ve got a >hose attachment on the bleed screw, but how far should I open it? After the >bubbles, when the engine is hot, I get what looks like foamy fluid for a >while, but if I keep bleeding it, I lose a lot of fluid and the overheating >starts again. I haven�t put the proper coolant balance in yet -- could that >be the problem? It seems that air is the problem, and when she overheats, >there�s definitely air in the radiator, but maybe that�s not the primary >problem...? Why are you supposed to elevate the front of the car to bleed? >The fluid doesn�t seem to start circulating through the radiator again until >I elevate the rear end. Yeah, I�m a little confused with it all. > >Anyway...any help is much appreciated. > >Thanks, >Joshua >89 Subaru Vanagon >
Have something to add on this topic today? Revive this thread in the forum »