Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: hard to reach seam rust .. best options
From:BenT Syncro
Date:Tue, 30 May 2006 19:40:19 -0700
On 5/30/06, Doug Alcock <doug.alcock@gmail.com> wrote:
>
> Here are before and after pics of the C!P1 panels --- I don't know if they
> were thinner than stock but my bodywork guy thought the were excellent.
> http://doug.alcock.googlepages.com/bodywork
>
> Cheers,
> Doug

Doug,

I actually held the CIP1 front fender arches in my hands and compared them
side by side with my Vanagon. The outside if the arches looks fine but the
inner portion was very poorly pressed.

I cannot speak about the rears as I did not have those on hand.

BenT  Fendhers