Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Spare Tire Holder
From:Christopher Gronski
Date:Wed, 31 May 2006 16:36:49 -0400

This is what I did instead to hold my Micheline 215/65-15s on 15" SA Rheins

http://www.van-cafe.com/vanagonparts.jsp?pa=ip&ip=764380099

Chris

On 5/31/06, joe trussell <vanagongl@hotmail.com> wrote:
> My new spare 14" vanagon alloy with 205/70/14 tire does not fit in my spare
> tire carrier.
>
> After researching the archives, I've found that apparently the older
> Vanagons (1985 here) have a smaller carrier, not as deep.  Different part
> number, even.  And, apparently the rad hoses are different on later models
> to create more space for a larger spare?
>
> Does anybody know of a way to fit the sucker in there without rubbing or
> hitting anything important?  If I cut the top bars, will the tire bounce
> around too much, pinch a hose, or rub the steering gear?
>
> I appreciate any suggestions!
>
> Thanks,
> Joe
>
> _________________________________________________________________
> On the road to retirement? Check out MSN Life Events for advice on how to
> get there! http://lifeevents.msn.com/category.aspx?cid=Retirement
>