In a message dated 6/12/06 10:04:28 PM Eastern Daylight Time,
macdonald1987@SBCGLOBAL.NET writes:

> The worst thing there is to do is to "invent" new anchors for the bottom
> mounts on the rear-facing seats. Large Allen bolts, with their large openings,
> promise to be the most secure. Just select the size that fits the posts on
> the bottom of the seat, and tighten into new holes in the floor, with a washer
> and a nut. That should be at least as secure as the buttons welded onto the
> floor for the original mounts

very good suggestion....  alot easier than welding in the factory jumpseat
foot "cups" to the floor..

chris