Check this out:  http://snipurl.com/ry8w

That's what I did on my 86 with auto trans.  This is not an audiovox CC,
but another universal one made by Dana.  I happened to have that bracket
laying around, but a bit of angle bracket would do nicely.  I used a long
bolt and put it through an unused hole in the bell housing.  I'm not sure
what sorts of adapters etc that the audiovox kit comes with, but this seems
like a nice clean set up to me.

Edward

At 04:54 PM 6/18/2006, Mike Elliott wrote:
>On 6/18/2006 12:50 PM Mike Collum wrote:
>>The difference is ... he has a 4 speed and you have an automatic.
>>
>>On the 4 speed, the bolt goes into a threaded sleeve that the throttle
>>cable passes through and the bolt snugs up against the end of the
>>cable's solid end.
>>
>>On the automatic, the "Pin" that the throttle cable passes through
>>doesn't grab the cable at all.  that's accomplished at the end of the
>>throttle cable's spring with a little "keeper".
>Well. That explains why some folks seem to have this handy and nearly
>perfect place to affix their servo cable to, and Mellow Yellow doesn't!
>Thanks Mike!
>
>Mike "Rocket J Squirrel" Elliott
>71 Type 2: the Wonderbus
>84 Westfalia: Mellow Yellow ("The Electrical Banana")
>KG6RCR