

| Subject: | Re: belt replacment...grrrrrr... |
| From: | Robert Fisher |
| Date: | Sat, 24 Jun 2006 19:10:06 -0700 |
Maybe we need some pics, unless somebody out there knows for sure what you ran into... sounds strange. Cya, Robert ----- Original Message ----- From: "robert shawn feller" <carboncow@GMAIL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Saturday, June 24, 2006 6:38 PM Subject: Re: belt replacment...grrrrrr... > thanks guys. I did figure this out. the compressor was rather stiff, i did > have to lossen the bottom pivot as to get the belt on/off not only did the > compressor need to pivot but the "goofy" tension arm thingy assembly had > to > pivot too. > > my is a SD708, so maybe it's slightly different!?!? > > Only took me 3 hours to change three belts (stupid vanagon!)... > > Shawn > > On 6/24/06, John Bange <jbange@gmail.com> wrote: >> >> >> i'm rather confused on how to slacken tension on the a/c >> > compressor. there appears to be both a top and bottom pivot point on >> > the >> > >> > compress along with the adjuster along the left. never seen anything >> > like >> > this before and it appears its just easier to remove the whole >> > a/c...got >> > to >> > be a better way. >> >> >> By coincidence I just came inside from putting on my new SD709 >> compressor. >> The tensioning arrangement for it is kinda weird. You might not need to >> loosen the two bolts at the "hinge point" on the right. The tensioneing >> bolt >> on the left is the tricky part. There's a nut on the vertical face of >> that >> black slotted metal brace. Loosen that nut to "unlock" the compressor. >> The >> head of the bolt that nut is on has a lateral threaded hole in it that >> faces >> upward. A hex socket headed bolt goes through a hole in the top of the >> brace >> and threads into that bolt head. By tightening that hex socket screw it >> draws the other bolt upwards, tightening the belt. Conversely, loosening >> that bolt will lower the compressor and loosen the belt. I can run out >> and >> take a picture, if you like. >> >> -- >> John Bange >> '90 Vanagon - "Geldsauger" >> > > > > -- > shawn feller, ohio > 1986 vw vanagon gl westfalia > 1993 vw eurovan gl > plus a couple of saabs, boats, jet skis, dog and wife (all require to much > maintenance, accept the dog)... > > www.carboncow.com > www.carboncow.net
Have something to add on this topic today? Revive this thread in the forum »