

| Subject: | Re: Cheap window fix. Was: Wind noises.... door - Followup |
| From: | s kraning |
| Date: | Sun, 25 Jun 2006 15:40:12 -0400 |
Neil - Interesting DIY fix for the window. Any thoughts on what to do about the driver's side vent that does the same thing? If I press the vent window in whilst driving, the squeeling/ wind noise will stop. I don't think the same weather stripping technique would work there (I've tried something similar.) Coincidentally, there is a small dent on the sheet metal of the d/s door near the mirror (from the p/o)...wonder if this is significant? Thanks, Scott 91 Carat ----- Original Message ----- From: "neil" <goofymuso@YAHOO.CA> To: <vanagon@GERRY.VANAGON.COM> Sent: Sunday, June 25, 2006 1:19 PM Subject: Cheap window fix. Was: Wind noises.... door - Followup > Hi all. > > > --- Mike Elliott <j.michael.elliott@GMAIL.COM> wrote: > >> Month or so ago I asked for advice and ideas on how >> to deal with a >> mysterious rushing wind noise that comes from the >> upper rear corner area >> of the driver's door when driving at speed. ...... > > > This post reminded me of another Road-Fix I did on my > Westy. Don't know if it's a long lasting solution, but > it worked well on the road and is still holding..... > > Driver side door was in an accident with PO. Repair > done ok, but window didn't seal against runner rubber. > The Road-Fix? > > Weather stripping. The good high density type. Don't > recall which thickness. Feathered bottom of strip (so > window wouldn't roll it up), and ran it along source > of leak (put strip facing out between forward rubber > runner strips). Had to futz with postioning, but end > result was it took out extra play between window and > rubber, and cut out a lot of wind noise. > > Cheers. > > > Neil Nicholson. > 1981 air cooled Westfalia. > Cheap-o web site: > > http://www.members.shaw.ca/tubanick/welcomewesty.html > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com >
Have something to add on this topic today? Revive this thread in the forum »