Thanks all I got it!

Chris

On 6/22/06, Mike Bucchino <mbucchino@charter.net> wrote:
> Chris,
>
>  You'll need to carefully pry it with 2 levers 180 degrees apart.  It'll
> come right off without too much trouble.
>
> Mike B.
>
> ----- Original Message -----
> From: "Christopher Gronski" <gronski@GMAIL.COM>
> To: <vanagon@GERRY.VANAGON.COM>
> Sent: Thursday, June 22, 2006 6:08 PM
> Subject: Re: Flywheel Removal
>
>
> > OK I got the bolts out by standing on the allen key (the engine is out
> > right now).
> >
> > But I can't seem to get the flywheel off. Can I just pry it?
> >
> > Chris
> >
> > On 6/22/06, David Bohannan <fjazzbass@gmail.com> wrote:
> >> Don't try this at home, but I used my impact wrench on them....that was
> >> literally the only thing that got em off...didn't booger up the bolts too
> >> bad either...
> >>
> >> Dave
> >>
> >>
> >> On 6/22/06, Christopher Gronski <gronski@gmail.com> wrote:
> >> > Is there a trick to remove the flywheel? Those suckers on on tight!
> >> > BTW are those 10mm allen key heads?
> >> >
> >> > Chris
> >> >
> >>
> >>
> >>
> >> --
> >> Dave - KC9FYM
> >> http://fjazzbass.blogspot.com
> >
>