On 6/29/06, Cary Chiang <ccc1@volny.cz> wrote:
>
> John:
> I can't come close to rotating the glass 90 degrees.  I still have the
> lower inner scraper installed, to prevent scratching my window tint
> on the metal window frame.  Now if I could remove the vent window frame,
> *then* I could rotate the main glass (but I would no longer need to
> do so).  I've already bent the vent window / front channel, while trying
> to rotate the top of the vent window frame to clear the metal channel
> on top of the door.  I can get the top of the frame out, but the bottom
> corner of the frame won't clear on the front edge, and the rear edge
> is hitting the upper front corner of the main glass.  Is it necessary
> to remove the window regulator, to remove the glass?  The Bentley has
> removal of the vent window frame and window regulator AFTER the main
> window removal instructions.  Arrghh.

Have you tries KY? =)

It should come out, Cary. I just remove all the weather stripping. They all
pop out anyway.You can put a flannel rag or other medium thickness material
on the edge of the sill if you are worried scratching your tint. Most of us
in CALIFORNIA do not worry about this because we are not allowed to have
film tint on the front side windows.

BenT G. Lass