I would start at a common point which would be the bulb ground.  Pop off the
grille, then remove the four screws that hold the headlight assembly in
place.  Remove both connectors on the back and use a common test light probe
to verify that both 12V positive and 12V ground for each bulb.  Use a short
jumper with alligator clip on each end to make a temporary ground substitute
connection at the bulb.

Route 66 Rider!
Ramon Hill
Live Long and Be Free
================================

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Benjamin Beasley
Sent: Thursday, July 20, 2006 10:12 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Headlights Not Working!

Got a curious electrical issue that y'all may be able to help me with.  My
1987 Syncro Vanagon suddenly lost headlights the other night.  Neither hi
nor low beams work.  The fuses are fine and the light switch on the dash
turns the console lights on and the running lights on.  The curious thing is
that the blue high-beam indicator light on the dash is stuck on.  No amount
of clicking the stalk on the steering column will get the high beam
indicator to go off.  Any thoughts?  Thanks in advance.

_________________________________________________________________
Is your PC infected? Get a FREE online computer virus scan from McAfeeR
Security. http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963