>  I noted there are "odd" sleeves over the lines running to the
> injectors and they have to have a "goop" in there like a varnish that has
> dripped out of one. Is this an adhesive for the sleeve? None would think
> gas
> and varnish are a logical connection but fuel definitely streams/drips
> when
> there is a leak so I'm not concern until reading this.

I had the same thing-- a trickle of black tarry/resiny goop-- with brand-new
fuel line in brand-new sleeve material. The sleeves are just some sort of
abrasion protective plastic, so it didn't come from that. The fuel line
outer jacket was fairly sticky right out of the box though, so maybe it's
the source? Perhaps residual solvent from the manufacturing process in the
outer jacket, cured out in the hot engine compartment? At any rate, it only
happened on the one fuel line from the bleeder tee to the starboard fuel
rail. I took the line off examined it thoroughly, put a new gray sleeve over
it, and reinstalled it. Not a drop since-- and I've been keeping a close eye
on it. Maybe it was a miniscule leak at one end or the other,  but I think
it unlikely. The fuel line arcs in a gentle inverted U between the two
endpoints and the goop was inside the sleeve, "uphill" from both ends. If it
was a leak in the line, it's apparently fixed itself. Very mysterious. I'd
love to hear if others have had this show up.

--
John Bange
'90 Vanagon - "Geldsauger"